Home>>Products>>Detox Ion Far Infrared MP619D Foot Spa

Detox Ion Far Infrared MP619D Foot Spa

Quick start instructions

To Prepare Detox Therapy for use:

1. Place a plastic bag or liner in the tub and fill with warm to hot water, to almost completely submerge the array. Test water to make sure it is not too hot.

2. Plug the array's cord in the top of the footbath and place array in the tub. Be sure array coils are completely covered with water.

3. Plug the power supply into the front of the footbath and then into an outlet in the wall.

4. Immerse feet in the water and turn on the unit.

5. Press "start" and the session will automatically start for 30 minutes.

6. To increase or decrease the session time, do so by pressing "-/+". Maximum time 60 minutes. Recommended session for a healthy adult is 30 mitnutes.

7. CheckAmperage (A). If below l.8 amps, sea salt must be added in very small increments until reaching the desired range of (1.8-2.2).

8. Stir water with array and view Amperage. Use as little salt as possible as it will deteriorate the array faster the more you use.

9. Use if the TENS electrode pads is optional, To use, plug into the front of the footbath. See (TENS Controls) for complete instruction on TENS.

10.Place the far infrared waist belt around the body to ease muscles painsor aches (i.e. lower back, shoulders, thighs)or around the waist or mid riff to aid in weight loss.Plug the belt into the machine unit on the back in the socsket, please re. item "Aboutjack" and "waist belt use".

11 .After 30 minutes, the machine finish work, close all the switch and power, pour the water and clean the array, make sure the array is clean and dry, so it could be use more times.